LÁSER FacialPure 5.0 Ultra, máquina láser de picosegundos no invasiva de doble mango con tecnología Brilliant Black, varilla de tracción y polea, para eliminar cejas y tatuajes.
- days
- :
- hours
- :
- min
- :
- sec
- * 【Mango doble】Las piezas de mano Pico-second y Ice-Hammer separadas le permiten cambiar instantáneamente entre la limpieza de pigmento de alta energía y el enfriamiento relajante, brindando una experiencia sin fricciones al cliente y maximizando el rendimiento de su tratamiento.
- * 【Sistema todo en uno de seis cabezales】Desde 1064 nm/532 nm no invasivo y láser 1064 nm/532 nm hasta sondas Black-Face, Eyeliner y Ice-Cool, puede abordar cejas, tatuajes, pigmentación y rejuvenecimiento, todo con un solo dispositivo, eliminando costos adicionales de equipo.
- * 【Portabilidad con ruedas incorporadas】El dispositivo se desplaza sin esfuerzo entre clínicas, spas o el hogar.
- * 【Potencia ultra alta y rendimiento estable】La salida máxima de 5000 W y un estabilizador de preencendido brindan ráfagas de energía rápidas para una fragmentación del pigmento más rápida, sesiones más cortas y una mayor vida útil de la lámpara.
- * 【Precisión verdaderamente no invasiva y cero tiempo de inactividad】Sin cortes, sin sangrado, sin ampollas, solo posicionamiento de precisión Red-Vine para alcanzar los objetivos de pigmento sin errores.











¿Cómo utilizarlo?
El instrumento debe llenarse con agua antes de encenderlo:
1. Abra el orificio de desbordamiento
2. Coloque el embudo en el orificio de llenado de agua y agregue agua destilada o agua purificada (para evitar obstruir el orificio de salida de agua).
3. Si sale agua por el orificio de rebose, significa que el instrumento está lleno. Deje de añadir agua y vuelva a enroscar la tuerca en el orificio de rebose.
4. Encienda el instrumento para su uso.
Consejo: Si usa el instrumento a diario, añada agua cada medio mes. Si no lo usa a diario, agréguela una vez al mes. Cambie el agua del instrumento cada dos meses.
Proceso y precauciones del lavado de cejas
1. Limpie la zona de la operación. (Para lavar las cejas, aplique una cantidad abundante de gel para evitar que queden blancas).
2. Lave las cejas desde la punta, frote con un hisopo de algodón y la piel se volverá blanca. Después de la operación, limpie el gel, aplique ungüento de eritromicina, envuelva la zona con film transparente y aplique hielo durante 15 minutos.
3. Si la piel no presenta heridas después de la operación, se recomienda tocar agua después de unas 24 horas. Si la piel presenta heridas, no podrá tocar agua hasta que se forme y recupere la costra. Aplique ungüento de eritromicina después de la costra para prevenir la infección. Si la piel no presenta heridas, pero está más roja e inflamada, aplique hielo una vez durante los primeros tres días, cada vez durante 15 minutos.
4. Las cejas de color normal se aplican cerca de la piel, no tire de la distancia, pruébelo cerca de la piel para ver si la piel se vuelve blanca, si no, levántelo 0,5 cm y el máximo no debe exceder 1 cm.
5. El lavado de cejas solo se puede realizar una vez y no se puede repetir. Repetir la aplicación puede causar hinchazón o sangrado.
6. No utilice la máquina de lavado de cejas con demasiada frecuencia. Si la velocidad es demasiado alta, las cejas se volverán blancas. Si las cejas están blancas, aplique solución salina durante 48 horas y se recuperarán.
7. No se recomienda usar delineador de ojos. Practique con él después de dominar el lavado de cejas.
8. Compruebe si la piel presenta inflamación antes de lavarse las cejas. Si tiene cicatrices o alergias, úselo con precaución. No es apto para personas con diabetes ni cardiopatías.
9. Mantenga la zona a tratar limpia y evite la fricción y las infecciones. Durante el período de enrojecimiento e inflamación, puede usar eritromicina. Aplique la pomada de eritromicina 1 o 2 veces al día para prevenir infecciones. No se recomienda realizar ejercicio intenso antes de que se caiga la costra (para evitar infecciones por sudoración), no usar maquillaje, no frotar la piel, no aplicar mascarillas faciales, no beber alcohol y evitar el uso de aspirina. Procure usar protección solar, ya que podría producirse pigmentación y aparecer cicatrices después de la infección.
Which types of people are not recommended to wash eyebrows?
1. People who have washed eyebrows many times: because the epidermis and dermis become thinner, the relative risk of washing eyebrows is also higher
2. People who are particularly prone to scarring: People who are prone to scarring on their bodies are prone to scarring or leaving scars, so it is not recommended to wash eyebrows
3. People with deep eyebrow tattoos: People who have deep eyebrow tattoos are not suitable for eyebrow removal. General eyebrow removal machines usually cannot handle it very effectively and the effect is not good
4. People with obsessive-compulsive personality tendencies: People with obsessive-compulsive personality tend to be nervous, anxious, eager to do well and have high demands on themselves. Therefore, even if they are very successful, they will still be dissatisfied
Tattoo removal operation and precautions
1. The recommended distance between tattoo removal and skin is 1-3 cm
2. Tattoo removal is not recommended for those who have had a tattoo for less than one year, and the effect will not be ideal
3. Before tattoo removal, use more than 75% medical alcohol to clean the skin, because there is a stratum corneum and dirt on the skin, so it is not easy to get infected after washing
4. If you can tolerate the pain of tattoo removal, do not apply anesthetics. Anesthetics are easy to proliferate. After tattoo removal, you can apply erythromycin ointment and ice for 15 minutes to prevent blistering and infection
5. When removing tattoos, you can only apply it once at the tattoo site, and you cannot apply it repeatedly
6. The tattoo will scab about 2 days after washing. Remember not to touch water before the scab forms. The scab must fall off naturally and cannot be picked off by hand to prevent scars!
7. After tattoo removal, you can choose to take oral anti-inflammatory drugs for 2-3 days and external repair products to assist skin metabolism
8. Avoid sun exposure and sweating after washing. Avoid spicy foods and dark foods such as soy sauce
9. The interval between tattoo removal is recommended to be more than 30 days, depending on the recovery situation
Precautions after freckle removal
1. The recommended distance for freckle removal is 1-2cm
2. After freckle removal, the skin may be red and swollen due to the energy irradiation, but this is normal. Sometimes there will be a slight heat sensation, but it will subside quickly.
3. After freckle removal, apply anti-inflammatory cream every day. The wound will slowly form a scab and fall off after about a week. At this time, the skin will be pink. During this process, pay attention to keep clean and avoid sun exposure, otherwise it will affect the effect of freckle removal.
4. If the pigment has not completely subsided after freckle removal, you don’t have to worry. You can have the next treatment in about 1 month.
5. Pay attention to continuous sun protection after surgery, eat less greasy and spicy food, keep a happy mood, and do not use whitening and irritating functional products.
6. On the 1st to 4th day after surgery, pay attention to "repair" work (apply growth factors), try not to touch water, use saline or distilled water to wipe, keep the treatment area clean and fresh, and apply some repair ointment.
7. Do not steam sauna or do strenuous exercise within seven days. Do not eat irritating and pigmented foods within seven days, such as coriander, celery, leek, spinach, chocolate, coffee, soy sauce, and prohibit smoking and drinking.
8. If there is scab, do not pick it with your hands, and do moisturizing care after ten days.
9. After a week, the wound will begin to scab and fall off. At this time, sun protection is an absolutely necessary step. Wear SPF30+ sunscreen when going out, and protect against the sun for at least 3-6 months.
Black Face Doll: It mainly has the effects of whitening, removing yellowness, controlling oil, and shrinking pores. A course of treatment is 3 to 5 times, and it can be done once a month.
1. After cleansing, apply a thin layer of gel (the gel should not be applied too thickly, as it will absorb light, and it will feel hot and tingling during operation, and it is difficult to blast and easily clog pores). After applying the gel, wait for the gel to dry before operating.
2. During operation, replace the black black face doll special operation head with energy between 200 and 500, mainly depending on the blasting force (the degree to which the gel can be blasted cleanly), 1-2cm away from the skin, and the frequency is 2~5hz (2hz is recommended for novices)
3. One part can only be applied once, not multiple times. Each part must be operated, and it cannot be applied casually, otherwise the blasting will not be clean and affect the effect
4. After the black face doll, you can wash your face with clean water after five minutes, and then apply a moisturizing mask, and then you can do normal skin care, and hydrate more in the later stage.
Probe function:
Non-invasive 1064nm red probe:
For washing black and blue eyebrows, eyeliner
Energy: 200-300mj, frequency: 1-3hz
Non-invasive 532nm blue probe:
Washing red, brown and coffee eyebrows
Energy: 200-300mj, frequency: 1-3hz
Minimally invasive 1064nm (colorless) probe:
Washing black and blue tattoos, removing deep spots
Tattoo removal energy: 300-600mj
Freckle removal energy: 600-10 00mj
Frequency: 1-3hz
Minimally invasive 532nm (colorless) probe:
Remove colored tattoos, remove shallow spots
Tattoo removal energy: 300-600mj
Spot removal energy: 600-1000mj
Frequency: 1-3hz
Black face doll probe:
Whitening, yellowing, oil control, shrink pores
Energy: 200-500mj, frequency: 2-5hz
Eyeliner Probe:
Remove eyeliner
Energy: 200-400mj, frequency: 1-3hz
CAUTION
1. Keep the pedal pressed and do not release it, not one step at a time, this design is safer!
2. Practique en papel A4 antes de usarlo. Puede usar un bolígrafo para ennegrecer y operar el instrumento sobre el texto negro.
3. ¡Ten cuidado de no encender y apagar a voluntad, es muy peligroso!
4. Las mujeres no pueden usarlo durante la menstruación.
5. No se recomienda operarlo usted mismo. Debe usar una máscara para los ojos para evitar lesiones accidentales.
6.Antes de usarlo por primera vez, el tanque de agua debe llenarse con agua.
Presupuesto:
Energía del pulso: 500-2900MJ
Ancho de pulso: 3-20NS
Velocidad de frecuencia: 1-10 Hz
Voltaje: 110 V-240 V
Potencia: 5000W
Longitud de onda: 1064 nm/785 nm/532 nm
Peso: 10 kg
Tamaño: 46*34*36CM
Lista de embalaje:
Máquina de picosegundos*1
Mango*1
Embudo*1
Pedal*1
Gafas protectoras*1
Protección para los ojos*1
Jefe de operaciones*6
Manual*1
There are no faqs for this product.